Tiny Lasers Acting Together as One: Topological Vertical Cavity Laser Arrays
September 26, 2021
International research team uses topological platform to demonstrate coherent array of vertical lasers
Israeli and German researchers have developed a way to force an array of vertical cavity lasers to act together as a single laser – a highly effective laser network the size of a grain of sand. The findings are presented in a new joint research paper that was published online by Science on Friday, September 24.
Cell phones, car sensors, or data transmission in fiber optic networks all use so called Vertical-Cavity Surface-Emitting Lasers (VCSELs) – semiconductor lasers that are firmly anchored in our everyday technology. Though widely used, the VCSEL device has miniscule size of only a few microns, which sets a stringent limit on the output power it can generate. For years, scientists have sought to enhance the power emitted by such devices through combining many tiny VCSELs and forcing them to act as a single coherent laser, but with limited success. The current breakthrough uses a different scheme: it employs a unique geometrical arrangement of VCSELs on the chip that forces the flight to flow in a specific path – a photonic topological insulator platform.
From topological insulators to topological lasers
Topological insulators are revolutionary quantum materials that insulate on the inside but conduct electricity on their surface, without loss. Several years ago, the Technion group led by Distinguished Professor Mordechai (Moti) Segev introduced these innovative ideas into photonics, and demonstrated the first Photonic Topological Insulator, where light travels around the edges of a two-dimensional array of waveguides without being affected by defects or disorder. This opened a new field, now known as “Topological Photonics,” where hundreds of groups currently have active research. In 2018, the Technion group also found a way to use the properties of photonic topological insulators to force many micro-ring lasers to lock together and act as a single laser. But that system still had a major bottleneck: the light was circulating in the photonic chip confined to the same plane used for extracting the light. That meant that the whole system was again subject to a power limit, imposed by the device used to get the light out, similar to having a single socket for a whole power plant. The current breakthrough uses a different scheme: the lasers are forced to lock within the planar chip, but the light is now emitted through the surface of the chip from each tiny laser and can be easily collected.
Circumstances and participants
This German-Israeli research project originated primarily during the Corona pandemic. Without the enormous commitment of the researchers involved, this scientific milestone would not have been possible. The research was conducted by PhD student Alex Dikopoltsev from the team of Distinguished Professor Mordechai (Moti) Segev of Technion’s Physics and Electrical & Computer Engineering Faculties, the Solid State Institute and the Russell Berrie Nanotechnology Institute at the Technion – Israel Institute of Technology, and Ph.D. student Tristan H. Harder from the team of Professor Sebastian Klembt and Professor Sven Höfling at the Chair of Applied Physics at the University of Würzburg, and the Cluster of Excellence ct.qmat – Complexity and Topology in Quantum Materials, in collaboration with researchers from Jena and Oldenburg. The device fabrication took advantage of the excellent clean room facilities at the University of Würzburg.
The long road to new topological lasers
“It is fascinating to see how science evolves,” said Distinguished Prof. Moti Segev, the Dr. Robert J. Shillman Distinguished Professor of Physics and Electrical & Computer Engineering at the Technion. “We went from fundamental physics concepts to foundational changes therein, and now to real technology that is now being pursued by companies. Back in 2015, when we started to work on topological insulator lasers, nobody believed it was possible, because the topological concepts known at that time were limited to systems that do not, in fact, cannot, have gain. But all lasers require gain. So topological insulator lasers stood against everything known at that time. We were like a bunch of lunatics searching for something that was considered impossible. And now we have made a large step towards real technology that has many applications.”
The Israeli and German team utilized the concepts of topological photonics with VCSELs that emit the light vertically, while the topological process responsible for the mutual coherence and locking of the VCSELs occurs in the plane of the chip. The end result is a powerful but very compact and efficient laser, not limited by a number of VCSEL emitters, and undisturbed by defects or altering temperatures.
“The topological principle of this laser can generally work for all wavelengths and thus a range of materials,” explains German project leader Prof. Sebastian Klembt of the University of Würzburg, who is working on light-matter interaction and topological photonics within the ct.qmat cluster of excellence. “Exactly how many microlasers need to be arranged and connected would always depend entirely on the application. We can expand the size of the laser network to a very large size, and in principle it will remain coherent also for large numbers. It is great to see that topology, originally a branch of mathematics, has emerged as a revolutionary new toolbox for controlling, steering and improving laser properties.”
For more than a century, the Technion – Israel Institute of Technology has pioneered in science and technology education and delivered world-changing impact. Proudly a global university, the Technion has long leveraged boundary-crossing collaborations to advance breakthrough research and technologies. Now with a presence in three countries, the Technion will prepare the next generation of global innovators. Technion people, ideas and inventions make immeasurable contributions to the world, innovating in fields from cancer research and sustainable energy to quantum computing and computer science to do good around the world.
The American Technion Society supports visionary education and world-changing impact through the Technion – Israel Institute of Technology. Based in New York City, we represent thousands of US donors, alumni and stakeholders who invest in the Technion’s growth and innovation to advance critical research and technologies that serve the State of Israel and the global good. Since 1940, our nationwide supporter network has funded new Technion scholarships, research, labs, and facilities that have helped deliver world-changing contributions and extend Technion education to campuses in three countries.